SHARE is a website offered by Netgear which makes WiFi range extender setup easier like never before. All users have to do is merely open a web browser on their wired or wireless device and go to this web address. Type the default login credentials and find your device set up within a matter of minutes. Sounds easy, isn’t it? Well, it is actually easy.

However, some users experience issues while logging in to the website. Generally, it displays an error message because of a few technical glitches. Thus, it prevents users from making a connection to it.

Technically speaking, the main reason of such error messages is that it is nothing more than a local web address. The Internet doesn’t recognize it as a standard website. That’s why users find difficulties to access it. All in all, it is an automated web user interface which enables users to make a reliable connection between their spanking new extender and existing wireless network, helping them maintain, control and configure Netgear extender setup.

Advantages of this website

It not only lands a helping hand to users when they install new extender setup but also offer a number of benefits. Let’s take a look at few of them:

  • Lets you keep tabs on connected gadgets with your home or office network.
  • Allows you to change network’s name as well as password as per your choice.
  • One can easily get their hands on router settings.
  • Executes port forwarding together with port triggering.
  • Increases the speed of your WiFi connection by upgrading the firmware of router and extender.
  • Enables you to troubleshoot problems with port opening on PlayStation and other gaming gadgets.
  • Users are able to perform speed to find out uploading and downloading speed.

So, these are main benefits of this web page. In addition to this, it allows you to say goodbye to dead zones in your home and repair poor connectivity problems.

Login credentials

During the process of wireless extender setup, when you go to this user interface, it requires you to type username as well as password in the given fields. Here, you will need to enter default login details. If you have ever changed them, then default ones will not work any longer. So, it’s recommended to use the current credentials.

Error messages while login

Once you type mywifiext in the URL bar of an Internet browser and hit enter key, you will be presented with error messages. These can vary on the basis of browser application you are making use of. Let’s say, you are using Apple Safari, then you will get an error that reads “can’t find server”. In the same manner, different browsers show different messages.

It provides users with first-rate customer support. So, whenever users experience problems during the setup process (which is quite obvious) such as password recovery, signal strength, security issues, and much more, they switch to this webpage right away. But they face errors and unable to connect to it. This causes customers annoyance and frustration.

Have you ever wondered why you are getting such warning pop-ups? If so, wonder no more. Here are some of the main reasons:

  • The speed of Internet is very slow.
  • Connectivity issues with your wireless home or office router.
  • No connection between range expander and access point.
  • Cookies, cache as well as browsing history of the browser you regularly use.
  • WiFi booster is not placed nearby your router.

And much more. Follow the instructions outlined below to get rid of these login problems:

  1. Placement of your device

You should place your WiFi range expander closer to access point. After completing the extender setup process, you can place it anywhere in the range of existing router.

  1. Make a reliable connection between extender and router

Make sure that you have connected your equipment with main access point in a proper manner. If not, connect it either wirelessly or via an Ethernet cable.

  1. Check all wired connections

In case you are connected to network with the help of an Ethernet cable, check it carefully. If it is old and have cuts in it, replace it with a new one.

  1. Use default IP address

Use your router’s default IP address to access this website instead of the URL. One can find it at the back side of their equipment. As soon as you found it, type it in the address bar of a web browser and press enter key.

  1. Clear cookies, cache and browsing history

The next way to resolve this login problem is to delete all cookies, cache along with browsing history. After that, exit your browser window and open it again.

  1. Reset web browser

Try to reset the browser you are making use of. In case the issue still exists, switch to another browser.

Thus, one can easily troubleshoot this problem.


If you are still unable to access Netgear user interface after following the above-mentioned steps, contact a tech expert in the industry and configure your range extender from scratch with the help of them. is the ultimate tech support provider all around the world, having knowledgeable technicians who always remain abreast of the latest technological trends. The one-time solution to all your tech issues is just a phone call away.


Please enter your comment!
Please enter your name here