SHARE

Summer and winter season require air conditioners to regulate the temperature of the house. If the outside weather is cold and chilly, people wait to return to their homes to enjoy the cozy environment in an impeccable manner. The device would work smoothly only when it is installed perfectly; however, the majority of people are unaware of the issues that they might have to face during the process. Here are some of the tips to complete the job without any problem:

Indoor unit

The first stage is to install the indoor unit as it forms an important part of the split air conditioners. They play an important role in eliminating the warm air from the room. You should avoid direct sunlight and heat because they cause more problems in the long run. Make sure that the unit is not installed at the place where the probability of gas leakage is higher.

One of the most important aspects of the installation is that the conditioner is placed at a distance of about 100 ft from the oil leakage area. Care should be taken about the seamless functioning of the air conditioner.

Wall needs to be strong to bear the weight of the unit in an impeccable manner. It is important to construct a wooden frame to support the structure.

Mounting plate to the interior wall:

The next step is to secure the mounting plate to the interior walls. In order to accomplish the task, you should hold the plate against the location of the wall for indoor installation.

Make sure that the component is at the same level. One may also have to drill a hole into the appropriate spots to attach the plate to the wall.

Create a hole:

After completing the above process, you will have to drill a hole in the position that is in sync with an opening of the mounting bracket.

The total diameter of the hole should not be more than 3 inches. It should be directed towards the exterior to provide adequate drainage.

After some time, users may have to insert a flexible flange into the hole.

Check the connectivity:

One of the most important aspects of the installation process is to check the electrical connections in detail. It is bound to go a long way in delivering sterling results to the users. People should lift the front panel and remove the cover inside out. Cable wires need to be connected to the screw terminal to ensure the seamless working of the indoor unit.

Connecting the pipes:


The next stage is to connect the pipes to the outdoor units located at the exterior. It is a vital process to maintain the outflow and the inflow of the air. The pipe cap should be placed in the interior locations of the PVC material.

After the completion of the task, it is important to bind the copper pipes and the power cables into a predetermined position.

The pipe is secured to the indoor unit and also ensures that there are no dangling wires protruding out of the air conditioner.

Install the condenser:

If you want to install the outdoor condenser, select the best place available on the exterior of the wall. You should lay the concrete pad on the ground to ensure proper leveling in an impeccable manner. Radio antenna or wire should not be located in close vicinity to the condenser as it may malfunction.

All electrical wires have to be connected to the proper ports. You can also follow manufacturer’s instruction to accomplish the task. Fasten the cables with a cable clamp before replacing the cover.

Installation of water draining pipe is essential to remove the blockage impeding the free flow of air.

LEAVE A REPLY

Please enter your comment!
Please enter your name here