Torque is known as a measure of how much force must be acting on an object which causes that object to rotate. In addition, this is known to be linked with a process that is defined as bolt tightening. This process is the one in which preload is applied to a fastener by turning the fastener’s nut in the minimum possible time. Ideally, friction plays an important role in calculating the amount of preload that is essential for tightening torques.

What are the  different types of torques?

In addition, the three different types of tightening torque for bolts components include the ones like torque used for stretching the bolt, the torques which are used for overcoming the friction in bolt and nut threads, and finally, it includes those torques which are used to overcome the friction at the nut spot face essentially the one which is known for bearing the nut spot surface. However, one of the major problems which are ideally faced by the bolted joints is that of precision, which is ideally linked with obtaining the amount of accurate preload.

Therefore, new methods are evolving for controlling the preload of threaded fasteners using the torque techniques. Ideally, controlling torque is one of the most popular means of controlling preload. Usually, when the bolt is tightened between the shanks, it causes stress. This happens because of the elongation strain. This is also accompanied by torsional stress. There is common parlance wherein the stress is usually ignored by the threads.

Types of fasteners

There are various types of fasteners which are available in the marketplace at a reasonable price and hence, they are known for using the fasteners like Nyloc and Cleveloc nuts. These are often used whenever there exists a risk of vibration loosening. It usually has the effect of increasing the stress which is directly proportional to the stress which is released by the torque. This release of stress is regulated to at least 75 percent by the bolt shanking process. This affects the conversion of the tightening torque.

It becomes into usage when the conversion is bound to result in causing the bolt preload. Therefore, they should be ideally used and reloaded for determining the correct torque value for the type of the fasteners which is ideally being pit to use for the purpose for achieving the different kinds of results in the best possible manner.


This is also noteworthy to mention that the fundamental problem which is linked with the torque tightening is that the majority of the torque is used to overcome the menace of friction and hence, 95 percent of the applied torque gets utilized in the same very process. However, this problem can be easily corrected by depending upon the components called friction stabilizers. These are the substances which are covered by the fasteners and hence play an important role in reducing the fractional scatter if any. However, one must be beware that the torque tightening process should be stabilized, and hence, it should be accommodated well.


Please enter your comment!
Please enter your name here